hamburger-icon
🌜
79 supported devices
Halium 9.0 beryllium Installer Buy ~250$

Supports cellular and data State: Active

Description

As hardware enthusiasts, you likely know how tough it is to get access to new, hyped hardware. When something like Xiaomi's POCO F1 surfaces, the intrigue definitely mounts. The POCO F1 (or sporting comparable internals) can still be expected to be difficult to get your hands on due to the effortless desire the covers to get there hands on it. The Acme Labs POCO F1 is one of the few devices still sporting hardware. POCO F1 you got an octa-core processor with up to 8 GB RAM, dual rear fingerprint sensor, 16 MP rear camera with support for Netflix's 120fps stabilization

Features & Usability

Automated Usability (beta)

This device currently offers minimal features, most of the smart functionalities might not work yet. It can be a very nice second device.

  • Actors:

  •  Manual brightness
  •  Notification LED
  •  Torchlight
  •  Vibration

  • Camera:

  •  Flashlight
  •  Photo
  •  Video
  •  Switching between cameras

  • Cellular:

  •  Carrier info, signal strength
  •  Data connection
  •  Dual SIM functionality
  •  Incoming, outgoing calls
  •  MMS in, out
  •  PIN unlock
  •  SMS in, out
  •  Change audio routings
  •  Voice in calls
  •  Volume control in calls

  • Endurance:

  •  24+ hours battery lifetime
  •  7+ days stability

  • GPU:

  •  Boot into UI
  •  Hardware video playback

  • Misc:

  •  Anbox patches (deprecated)
  •  AppArmor patches
  •  Battery percentage
  •  Offline charging
  •  Online charging
  •  Recovery image
  •  Reset to factory defaults
  •  RTC time
  •  Shutdown / Reboot
  •  Wireless External monitor
  •  Waydroid

  • Network:

  •  Bluetooth
  •  Flight mode
  •   Hotspot
  •  WiFi

  • Sensors:

  •  Automatic brightness
  •  Fingerprint reader
  •  GPS
  •  Proximity
  •  Rotation
  •  Touchscreen

  • Sound:

  •  Earphones
  •  Loudspeaker
  •  Microphone
  •  Volume control

  • USB:

  •  MTP access
  •  ADB access
Working

Confirmed, depending on the maintenance

Not Working

If there is a link here, follow it to learn more''

Partial

Working to some extent but with issues

Global Issue

Issue is not specific to this device

Untested

Subject to port development

Release channels

This device gets updates through these channels, learn more about OTA updates

Ubuntu Release
Channel
Version
Release Date
Description
Xenialdevel2022-03-1111-03-2022Daily built development releases
Xenialrc2022-W0609-02-2022Testing before the next stable release
XenialstableOTA-2209-02-2022Stability over newer features (recommended)

Xiaomi Poco F1

Specifications

CPUOcta-core (4x 2.8 GHz Kryo 385 Gold & 4x 1.8 GHz Kryo 385 Silver)
ChipsetQualcomm SDM845 Snapdragon 845
GPUAdreno 630
Storage64 GB, 128 GB, 256 GB
Memory6 GB, 8 GB
Android VersionAndroid 8.1 (Oreo), upgradable to Android 10.0
BatteryLi-Po 4000 mAh, non-removable
Display6.18 inches, 96.2 cm2 (~82.2% screen-to-body ratio), 1080 x 2246 pixels, 18.7:9 ratio (~403 ppi density)
Rear Camera12 MP, f/1.9, 1/2.55", 1.4µm, dual pixel PDAF, 5 MP, f/2.0, (depth)
Front Camera20 MP, f/2.0, (wide), 1/3", 0.9µm
Architecturearm64
Dimensions155.5 x 75.3 x 8.8 mm (6.12 x 2.96 x 0.35 in)
Weight182 g (6.42 oz)

Important Notes

Apart from the features listed above, there are few things to note:

  • Anbox can be installed with sudo anbox-tool install and you can refer documentation here. However, there is a bug that prevents reboot to work when anbox is installed. You need to long press the power button to force restart the device. Also, when OTA updates are downloaded from settings, you need to long press power and volume up button to go into recovery mode to install the pending updates. Anbox support is experimental .